A householder planning application in London normally needs a location plan, a site or block plan, existing and proposed floor plans, existing and proposed elevations and, for most extensions and lofts, sections. Each council publishes a local validation list that may add to this, and an application missing any item cannot be validated.
The drawings
| Drawing | Usual scale | What it shows |
|---|---|---|
| Location plan | 1:1250 or 1:2500 | The site outlined in red, any other land you own in blue, and at least two named roads |
| Site or block plan | 1:200 or 1:500 | The house, the proposed work, boundaries and neighbouring buildings |
| Existing and proposed floor plans | 1:50 or 1:100 | Every floor affected, with room uses |
| Existing and proposed elevations | 1:50 or 1:100 | Every side of the house that changes, with materials noted |
| Existing and proposed sections | 1:50 or 1:100 | Heights, floor levels and roof pitches |
| Roof plan | 1:100 | Needed for lofts, dormers and most extensions |
Drawings must be accurate and to a stated scale, with a scale bar. Councils increasingly reject drawings that are not based on a measured survey, because heights and boundary positions decide whether neighbours are affected.
The documents
- Application form, submitted online through the Planning Portal or the council's own system.
- Ownership certificate, confirming who owns the land and that any other owners have been notified.
- Application fee, set nationally and published on the Planning Portal.
- CIL form, needed by London councils to assess the Community Infrastructure Levy, even where none is payable.
- Design and access statement in a conservation area or for listed buildings.
- Supporting reports where the site needs them, for example a flood risk assessment, heritage statement or tree survey.
What helps an application succeed
- 3D views that show the extension in context, which help the planning officer and the neighbours understand the proposal.
- Neighbour daylight checks, such as the 45-degree test, shown on the drawings.
- Matching the council's design guide. Most London boroughs publish guidance on extension depth, roof forms and materials.
We prepare every drawing from a measured survey of the house and check the council's validation list before submission, so applications are validated first time.