Green Code Architects logo Green Code Architects Green Code Architects

Can I convert my house into flats in London?

Why converting a London house into flats or an HMO needs planning permission, the space standards each flat must meet, and how councils protect family homes.

Published

Often, yes, but it always needs planning permission. Dividing one house into two or more self-contained flats is a material change of use, and there are no permitted development rights for it. Whether a council will approve it depends mainly on the size of the original house, the quality of the new flats and the borough's policy on family housing.

What councils look at

  • Protection of family homes. Many London boroughs resist conversions of smaller houses, and some set a minimum original floor area or require at least one family-sized unit, usually with direct access to a garden. These policies vary considerably from borough to borough.
  • Space standards. Every new flat must meet the nationally described space standard adopted in the London Plan. A one-bedroom flat for two people needs at least 50 square metres, a two-bedroom flat for four people at least 70 square metres, and a three-bedroom flat for five people at least 86 square metres, all on a single storey.
  • Daylight, outlook and stacking. Bedrooms should sit over bedrooms and living rooms over living rooms, to limit noise between flats.
  • Amenity space. The London Plan expects private outdoor space of at least 5 square metres for a one or two-person flat, plus 1 square metre for each extra occupant.
  • Refuse, cycle storage and parking. Bin and cycle stores must be shown on the drawings, and many boroughs require the new flats to be car-free.

Houses in multiple occupation

Changing a house to a small HMO of three to six unrelated people is permitted development in principle, but most London boroughs have Article 4 directions that remove that right, so planning permission is needed. A large HMO of seven or more people always needs planning permission, and an HMO licence from the council is a separate requirement.

Building regulations

A conversion must meet building regulations for fire separation between flats, sound insulation, escape routes and energy performance. These standards often shape the layout as much as planning does, so we design the two together from the start.

How we approach it

We start with the planning history and the borough's conversion policy, then test the number and mix of flats that will meet the space standards before any design work. Where a conversion is unlikely to be approved, we say so early and look at alternatives, such as an extension and loft that add value as a single house.

Begin a conversation

Tell us a little about the house or site and we'll arrange a first conversation with a director. Or call us on 020 8004 4464.

  • Every enquiry is treated in confidence.
  • For sensitive settings, we'll outline the likely planning considerations at the first meeting.
  • A director replies personally. The first conversation covers your site, your brief, the likely planning route and how an appointment would work.
  • Structural engineering, specialist planning reports and construction can be coordinated through the group with our sister companies, if you want them.
I'm